It is always amazing how the floor tiles of the shower become so dirty when we only get clean there. But the truth is that water can stain, soap residue can accumulate and the dirt of the world that we wash away can get stuck to the gout and cover the tiles.
Hard water can cause build-up that is difficult to remove. Water can also contain hard minerals, such as lead, that can stain our shower walls and floors. Things like hair, grease and other dirt that comes from us in the shower can cause stains and blockages in the drain. This back-up of water can also cause the tiles to become dirtier and stained.
Even the bottom of our feet, depending on what we have done, can leave dark spots and worse. Mud from the garden or bits of paint, oils and even tufts of animal hair can get stuck and make even more mess than before. It can be ground in the porous texture of the tiles or grout around the tiles.
Home Cleaners Toronto, Housekeeping Toronto, Housekeeper Toronto, Move Out Cleaning, Condo Cleaning Toronto, Move in Cleaning Service, Housekeeper Toronto, Maid for Condos, House Cleaner Toronto, Home Cleaners Toronto, Affordable Housekeeping,
House Cleaning Services Toronto, Move in Cleaning Service An open window in the room can also lead to more dirt and other items that form a mess. This daily accumulation of soap, dirt and grease, shampoo and hair can really be a mess. So let"s get it clean again.
Simple Cleaning Guide for Shower Floors
One of the best ways to get your shower super clean is to let the professionals do it for you. It is so much easier to maintain and you can be sure it is clean. However, if you are looking for a major cleanup, here are some tips and steps you need to take for the best results.
Remove Large Dirt
Try to remove the larger pieces of hair, dirt and other soap residues that were attached to the floor. There can be a large hairball around the drain. Use a plastic scraper to remove the foam and dirt from the floor and the joint between the tiles. This prevents it from running down the drain and causing a blockage.
Spray the Tiles and Joints
Use a good cleaner to spray all tiles. You may need a stronger cleaner for grouting if there is mold. Something with bleach will work. Be careful with bleach. You may want to use it diluted and not mix it with other cleaning agents. This can cause harmful fumes that can make you sick or dizzy. Keep the area as ventilated as possible.
Allow the vacuum cleaner to soak for a few minutes. This means that it can soak and come loose in all soap residues and break down mold or mold. If you have pets or people who tend to shed a lot of hair, this is a good time to add a little drain cleaner. It can empty the drain while the vacuum cleaner does its magic. Be careful not to mix the chemicals.
Scrub
Use the tool you are most familiar with, scrub the tiles and add them around the tiles. If you have sensitive skin, you may want to wear gloves. If you use bleach or cleaning agents with harsh chemicals, gloves are a good idea.
Scrub the entire floor and make sure that you do not inhale the rough odor and that you do not scratch the tiles. Try to get to the extreme corners of each individual tile, because the scoop does not only accumulate in the middle. Those are the places you see the next time you"re in the shower, it"s almost like they are laughing at you!
It is a good idea to flush the area during work, so see how it goes. You may need to add cleaner to the more stubborn places. You may also need a sharp type of tool to go into the corners.
Don"t forget the drain, because all the people gather there. Removable bits must be removed manually and should not pass through the drain if possible.
Flush
Rinse the floor thoroughly. Use hot water to remove the soap and fat that has just been removed. Let the warm water run a bit and make sure you get all the corner spaces. Hot water helps clog the drain by making soap and cleaning agents come down more easily.
Give the floor a final check before shutting off the water. Ensure that all foam and stains are removed.
Dry
Use a nice absorbent towel or cloth to wipe the tiles and mortar. The water leaves water stains and streaks, so you want to keep the area dry. Make sure you get it in the joint to prevent the return or growth of mold and mold.
If desired, use a small window cleaner to give it an extra shine and shine. Just spray the tiles a little and polish it until it all looks like it was never dirty.
If you wash the shower cubicle or the walls at the same time, you first want to clean the walls. Everything from top to bottom.
Enjoy the beauty
Make sure you are the first to use a nice clean shower. Nothing is more annoying than turning things around and getting everything confused.
If you have many problems with stains, mold or rust, consider having it professionally cleaned. This makes it look much better and maintenance is much better for you.
If you are concerned about harsh chemicals, there are a host of environmentally friendly cleaning products available. This is a good idea if you have asthma, small children and pets or someone with breathing problems at home.
Regular cleaning always makes it easier to keep looking fresh and clean. Find your favorite cleaners and tools on your favorite music and try to make the most of a not-so-pleasant job.
درباره این سایت